Rexroth Connection Elements

T-Nut

• Standard element for secure, conductive connections
• Stop for correct positioning in the profile slot
• Stainless steel T-nut, e.g. for outdoor or cleanroom applications

Cage Nut

• For fastening surface elements or 19″ devices on profile
• Easy assembly as tension springs snap into the recess

Collar Screw

• Collar screw with multi-function head so that tightening with a ring/open-end wrench (WS 13) or Torx screwdriver (T40) is possible
• Machine tightening possible
• Preferably to be used for fastening angles
• Quick and simple assembly
• Excellent force transmission via the wide flange

Flange nut, T-bolt

• Secure, conductive connection
• Notch at bolt end as marker for identifying correct position
• Profile finishing: not required

Sliding block, sliding block profile

• Sliding block for reliable absorption of high forces
• Sliding block profile for self-assembly of individual fastening elements
• The spring assists with the assembly and positioning of the sliding block and swivel-in sliding block

Sliding block, sliding block profile, swivel-in

• Swivel-in sliding block profile for self-assembly of individual fastening elements
• The swivel-in sliding block for inserting directly at the installation position for really easy assembly
• The swivel-in sliding block with spring can be inserted directly at the assembly point and fixed in position thanks to attached springs
• The swivel-in sliding block with headless setscrews permits shake-proof fixing in all positions

Spring

The spring assists with the assembly and positioning of the sliding block and swivel-in sliding block

Straddling nut

• For attaching light accessories such as cable fasteners or rings
• Easy assembly by clipping into the profile groove

Parallel connector

• For gap-free connecting of two strut profiles, parallel to the axis or at any angle
• Parallel connector consisting of two sliding blocks with welded springs for simple assembly
• Attractive-looking interior connection, e.g. for material shelves
• Connection possible in any position
• Transferable displacement force per parallel connector: 600 N

Tensioning connector

• Tensioning connector for fast assembly
• The connector can be moved within the slot
• Easily accessible screws
• Three slots are left free for mounting surface elements

Groove Junction

• Slot connector for fast assembly
• The connector can be moved within the slot
• Easily accessible screws
• Anti-torsion element can be removed if necessary
• Variable alignment (slot 10/10; 8/10)

Inner bracket

• For elegant, easy-to-assemble profile connections
• Especially suitable for constructing frames for doors, protective grilles, or partition walls

Inner bracket R

• For elegant, easy-to-assemble profile connections
• Especially suitable for constructing frames for doors, protective grilles, or partition walls

Miter bracket

• For making right-angled, miter-cut profile connections
• Profile finishing with open profile slots: not required

Heavy-duty connector 180×180 dynamic load

• Heavy-duty connector for reliable absorption of high forces
• Can be used for both static and dynamic forces
• Profile finishing: not required
• Calculation program for static and dynamic forces included in MTpro engineering software

Bracket

• Brackets with centering lugs for rapid, precise assembly with protection against turning
• Centering lugs can be easily broken off for assembly on plates or at right angles to the slot
• Profile finishing: not required

Angle piece R

• For connecting profiles at any angle
• No obtruding edges due to rounding of bracket
• Centring lugs can be easily broken off for assembly on plates or at right angles to the slot
• Version designLINE with special silver paint (RAL 9006) for an especially high-quality design

Steel bracket

• Steel bracket without centring lugs for fastening at any angle

Metal bracket, supporting bracket

• Metal bracket for right-angled profile connections
• Surface elements can be screwed into the stiffening fin hole
• Supporting bracket for fastening surface elements to profiles, e.g. for shelves

Metal bracket

• Fastening of leveling feet offset inwards or wheels with thread M12
• For right-angled profile connections
• Profile finishing: not required

Foundation bracket

• Foundation bracket for securing frames to the floor
• The drilled hole for the floor dowel can be made without removing the foundation bracket

Profile connector

• Profile connector for the end-face connection of any profiles
• For an especially strong connection: one profile connector per slot

Central bolt, cover cap

• Lowest-cost connecting element
• Self-tapping screw, can be mounted without profile finishing
• Cover cap for sealing through-holes in closed profiles

Anti-torsion element

• Provides torsion resistance for profile connections with central bolts or quick connectors
• Subsequent installation in the connection possible

Cubic connector

• For torsion-resistant corner connection of profiles with equal cross-sections
• Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
• Cover caps to cover the openings
• Screw fitting on profile with self-tapping screws

Corner bracket

• Corner bracket for corner connection of 3 square or half-round profiles with equal cross-sections
• Screw fitting on profile with self-tapping screws
• Spherical or cubic cover caps to provide protection from injury and to prevent soiling

End connector

• For end-to-end profile connections
• Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
• Profile finishes:
  30×30: M8 thread cutting in core
  40×40, 45×45, 50×50: not required

T-connector

• For right-angled profile connections
• Profile finishes:
  30×30: M8 thread cutting in core
  40×40, 45×45, 50×50: not required

Connector 45°

• For connecting profiles at an angle of less than 45°
• Suitable for reinforcing frames
• Connectors 45° 40×40 and 45×45 with centring lugs for easy positioning (centring lugs can simply be broken off for installation in the profile slot)
• Version designLINE with special silver paint (RAL 9006) for an especially high-quality design

Quick connector, 6 mm slot, 0°, 90° cover cap

• For the right-angled connecting of two profiles
• Very good accessibility for tools during assembly 
• Profile finishing: Blind hole DB8 or through-hole D8

Quick connector, 8/10 mm slot, 0°

• For the right-angled connecting of two profiles
• Very good accessibility for tools during assembly 
• Quick connectors can be swivelled into the profile slot at the point of assembly
• Profile finishing: blind hole DI, DB11, DB17 or through-hole  DI, D11, D17

Quick connector, 8/10 mm slot, 90°, cover cap

• Tie rod head rotated at a 90° angle to the connector sleeve
• Profile finishing: blind hole DI, DB11, DB17 or through-hole  DI, D11, D17

Quick connector, bendable – end-to-end

• For end-to-end connecting of two profiles with equal cross-sections and at any angle, e.g. for frames
• Profile finishes:
  • blind hole DB11, DB17 or through-hole D11, D17
  • miter cut

Quick connector, bendable – end-to-slot

• For end-to-slot connecting of two profiles at any angle, e.g. for framework constructions
• Profile finishes:
  • blind hole DB11, DB17 or through-hole D11, D17
  • miter cut

Longitudinal end connector

• For the end-to-end connecting of two profiles
• Through hole D17 (two-sided longitudinal end connector)
  • Blind hole DB17 or through-hole D17 (end connector on one side)

Bolt connector

• For the right-angled connecting of two profiles
• Designed for heavy loads and torsion
• Can be installed in closed frames
• Profile finishing: through-hole D11, D17

Bolt connector

• For the right-angled connecting of two profiles
• Designed for heavy loads and torsion
• Profile finishing: through-hole D11, D17

QV fastening kit

• For the right-angled connecting of two profiles
• Very good accessibility for tools during assembly 
• Bending moments must be avoided

Lifting eye bolt

• To lift aluminium profile frames
• Profile finishing: M12 thread cutting in central hole