Feet

Modular levelling feet

Spindle

• Levelling feet for compensating irregularities in the floor up to 10°
  – modular system, various combinations possible
  – spindles and base plates can be combined as desired
  – base plates with screw hole for simple screw fitting to the floor
• Profile finishing: thread M in central hole

Base plate

• Levelling feet for compensating irregularities in the floor up to 10°
  – modular system, various combinations possible
  – spindles and base plates can be combined as desired
  – base plates with screw hole for simple screw fitting to the floor
• Profile finishing: thread M in central hole

Base plate with screw hole

• Levelling feet for compensating irregularities in the floor up to 10°
  – modular system, various combinations possible
  – spindles and base plates can be combined as desired
  – base plates with screw hole for simple screw fitting to the floor
• Profile finishing: thread M in central hole

Oval base plate with screw hole

• Levelling feet for compensating irregularities in the floor up to 10°
  – modular system, various combinations possible
  – spindles and base plates can be combined as desired
  – base plates with screw hole for simple screw fitting to the floor
• Profile finishing: thread M in central hole

Damping plate

• Leveling feet for compensating irregularities in the floor up to 10°
  – modular system, various combinations possible
  – spindles and base plates can be combined as desired
• The damping plate prevents the transfer of vibrations and allows a defined conduction of voltages via a set of grounding components

Levelling feet

Levelling foot D20

• For compensating irregularities in the floor up to 5°
• Fully assembled spindle and base plate
• Profile finishing: thread in central hole

Levelling foot D30

• For compensating irregularities in the floor up to 5°
• Fully assembled spindle and base plate
• Profile finishing: thread in central hole

Levelling foot D44, D58, D90

• For compensating irregularities in the floor up to 5°
• Fully assembled spindle and base plate
• Profile finishing: thread in central hole

Damping ring

• The electrically insulating damping ring prevents the transfer of vibrations and allows a defined conduction of voltages via a set of grounding components

Leveling foot D80

• For compensating irregularities in the floor up to 5°
• Fully assembled spindle and base plate
• Profile finishing: thread in central hole

Foot

• For compensating irregularities in the floor up to 5°
• Fully assembled spindle and base plate
• Profile finishing: thread in central hole

Plate

• For fastening leveling feet in profiles without a central hole
• For use as an end connector or T-connector
• Profile finishing: tapping of thread in the central hole

Threaded Sleeve

• For fastening levelling feet at an angle to the longitudinal profile direction
• Profile finishes:
  – blind hole DB17
  – through-hole D17

Base plate, steel

• For constructing supports for partition walls and protective walls
• Available in 40×40, 45×45, 40×80, 45×90, 80×80 & 90×90.

Base plate, 135×135

• For constructing supports for partition walls and protective walls
• Anchoring with floor dowel

Base plate, 270×360

• For constructing supports for partition walls and protective walls
• Anchoring with floor dowel

Base plate, 120×120

• For flush mounting of supports. No tripping hazards!
• Markings arranged at the center of the profile for precise alignment
• Anchoring with floor dowel

Base plate, 150×150

• For flush mounting of supports. No tripping hazards!
• Markings arranged at the center of the profile for precise alignment
• Anchoring with floor dowel

Foot 60×60-80×80

• For constructing supports made of 80x80L and 60×60 profiles
• Large installation surface for good stability
• Easy cleaning due to small number of horizontal surfaces
• Open on the inside to allow draining of liquids
• End stop as depth limit for profile (removable)

Floor dowel, washer

• For anchoring the base plates
• For leveling on uneven flooring

Wheels

Double wheel

• Attractive-looking double wheel for light applications
• Made of oil-resistant material
• Double wheel with lock
• Double wheel D50-D10 for insertion in the central hole with a diameter of 10 mm
• Double wheel D50-M8 for bolting into the profile slot

Roller, gentle on floors

• Especially gentle on floors
• Suitable for ESD-sensitive areas. Conductive material version in accordance with DIN EN 61340-5-1; conduction resistance ≤ 10⁶ Ω

Roller, oil-resistant

• Resistant to oil, for use in workshop areas

Roller, clean room

• Suitable for use in clean rooms. Conductive material version in accordance with DIN EN 61340-5-1; conduction resistance 10³ up to 10⁸ Ω
• Suitable for ESD-sensitive areas. Conductive material version in accordance with DIN EN 61340-5-1; conduction resistance ≤ 10⁶ Ω

Roller, solid rubber

• Rubber running surface made of solid rubber with good deformation elasticity. No permanent flattening of the wheel due to it traveling over edges or not being moved for long periods
• Suitable for ESD-sensitive areas. Conductive material version in accordance with DIN EN 61340-5-1; conduction resistance ≤ 10⁶ Ω

Heavy-duty wheel

• Heavy-duty wheel with mounting flange
• Available as a caster wheel with lock, caster, and trestle wheel
• Heavy-duty, particularly suited for workshop applications
• Wheels with excellent running properties
• Screw-on plate for attachment to 40 mm or 45 mm profiles

Lifting wheel

• Steerable lifting wheel
• The wheel turns into a stable base simply by engaging the stop lever
• Screw-on plate for mounting the lifting wheel
• With “Ideal-Stop”: locking lever does not swivel with the steerable caster but remains in the defined position. The locking lever is fixed in position on the frame by means of the screw-on plate, and the caster wheel moves freely

Roller with mounting flange

• Robust rollers with mounting flange
• Good running properties, particularly suitable for workshop areas
• Available as a caster wheel with lock and as a trestle wheel
• LR with lock: lock prevents the wheel from rolling or turning

Lifting wheel – Rotatable Pedal

• Steerable lifting wheel
• The wheel turns into a stable base simply by engaging the stop lever
• The locking lever moves with the wheel
• The locking lever can be moved under the frame if necessary

Lifting wheel – rotatable pedal ESD

• Steerable lifting wheel
• The wheel turns into a stable base simply by engaging the lock
• The locking lever moves with the wheel
• The locking lever can be moved under the frame if necessary
• The base is centred under the rotary table