Rexroth Joints
A range of joints for use with Rexroth’s basic modular system.
Joint lockable
Joint 30×30 lockable
- For adjustable or rigid profile connections
- For high loads up to 45 Nm in the swivel direction
- Positive interlocking thanks to Hirth toothed coupling
- Swivel range 180°
- Easy adjustment in the 7,5° modular dimensions
Joint 40×40 lockable
- For adjustable or rigid profile connections
- For high loads up to 100 Nm in the swivel direction
- Positive interlocking thanks to Hirth toothed coupling
- Swivel range 180°
- Easy adjustment in the 5° modular dimensions
Joint
Joint 20×20
- For movable or rigid profile connections at any angle
- Swivel range 180°
- With marking in 15° increments
- Clamping (3 Nm) and convenient adjustment of joint using a clamping lever (M4x20)
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
Joint 30×30
- For movable or rigid profile connections at any angle
- Swivel range 182°
- With marking in 15° increments
- Locking by clamping (5 Nm) or fixing with pins (15 Nm)
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
Joint 40×40, 40×40 support
- For movable or rigid profile connections at any angle
- Swivel range 180°
- With marking in 15° increments
- Clamping and convenient adjustment of “support” joint using a clamping lever (5 Nm)
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
Joint 45×45, 45×45 support
Joint 60×45
- For movable or rigid profile connections at any angle
- Swivel range 182°
- With marking in 15° increments
- Locking by clamping (5 Nm) or fixing with pins (15 Nm)
- The joint can be adjusted using a clamping lever.
Joint 60×60
- For movable or rigid profile connections at any angle
- Swivel range 182°
- With marking in 15° increments
- Locking by clamping (5 Nm) or fixing with pins (15 Nm)
- The joint can be adjusted using a clamping lever.
Swivel Bearings
Swivel bearing 40×40, 40×80
- Suitable for swiveling right-angled profile connections, e.g. for constructing supporting arms or doors
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
- Profile finishing: drilling of through-hole D17
Swivel bearing 45×45, 45×90
- Suitable for swiveling right-angled profile connections, e.g. for constructing supporting arms or doors
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
- Profile finishing: drilling of through-hole D17
Supporting arm joint
Supporting arm joint 40×40, 40×80
- Suitable for swiveling end connections, e.g. for the construction of supporting arms
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
- Profile finishing: drilling of through-hole D17
Supporting arm joint 45×45, 45×90
- Suitable for swiveling end connections, e.g. for the construction of supporting arms
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
- Profile finishing: drilling of through-hole D17
Bearing pedestal
Bearing pedestal
- Bearing pedestal for heavy constructions which are to be able to swiveled
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
Swivel fastening, 180°
Swivel fastening, 180°
- Swivel fastening for shelves, etc. which need to be positioned at an angle of ± 90°.
Clamping Lever
Clamping Lever
- Clamping elements for adjustable connections
Star knob
Star knob
- Clamping elements for adjustable connections
