Mounting of Rexroth Surface Elements
A multitude of mounting solutions for Rexroth surface elements.
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_36982_20210723_075217.web_.png)
Mounting rim profile
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_34432_20170428_083023.web_.png)
- For the play-free mounting of surface elements in the profile slot
- For surface elements up to 6 mm thick
- Installation during frame assembly
- Mounting rim profiles PP can also be used as cover profiles
Mounting rim profile, cleanroom
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_22502_20161017_140604.web_.png)
- For the play-free mounting of surface elements in the profile slot
- For surface elements with a thickness of 2–8 mm
- One or both sides of the mounting rim profile used, depending on the thickness of the surface element
- Installation during profile frame assembly
- Suitable for use under clean room conditions
Protective pane profile, PVC
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_34433_20170428_083201.web_.png)
- For the play-free mounting of surface elements in the profile slot
- For surface elements with a thickness of 1.5–8 mm
- For subsequent installation in closed frame constructions
- Installation of surface elements at center of slot
- The protective pane profile consists of the basic profile (A) and the clip-on strip (B)
Protective pane profile, clean room
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_34434_20170428_083436.web_.png)
- For the play-free mounting of surface elements
- For surface elements with a thickness of 2–8 mm
- For subsequent installation in closed frame constructions
- Installation of surface elements flush with the profile edge
- The protective pane profile consists of the basic profile and the clip-on strip. Both profiles are required to ensure proper functioning.
Variofix Block
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_34435_20170428_083633.web_.png)
- For surface elements with a thickness of up to 13 mm
- For subsequent installation in closed frame constructions
- Asymmetrical form enables surface elements to be fastened in two different positions
- Clamping with snap-in clip or screw fitting with square nut M6 (included in scope of delivery) and screw
- Retainer ring for connecting the screw to the surface element (Machinery Directive 2006/42/EC)
Variofix block S
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_34436_20170428_083735.web_.png)
- For virtually gap-free surface element mounting
- For subsequent installation in closed frame constructions
- The asymmetrical design and cover cap enable the surface elements to be mounted in different positions: flush with the profile edge or in front of the profile
- Retainer ring for connecting the screw to the surface element (Machinery Directive 2006/42/EC)
Bracket S
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_34437_20170428_083840.web_.png)
- Bracket with thread for virtually gap-free mounting of surface elements
- For subsequent installation in closed frame constructions
- The surface element can be mounted in different positions: flush with the profile edge or in front of the profile (by breaking off the centering lug)
Retainer ring
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_22517_20160907_141855.web_.png)
- Secures the fastening screw to the surface element
- For use with all Variofix blocks, but not for the S bracket
- Retrofitting possible
- For various thread sizes
Cover strip profile
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_22530_20160907_142103.web_.png)
- Cover strip profile for fastening surface elements using standard sheet metal screws
- Clipping the cover strip profile into the profile slot
- Low-cost connecting element
Universal plate
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_34438_20170428_084419.web_.png)
- For the construction of trays, material shuttles, or privacy shields on tables or frames
Potential equaliser
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_36982_20210723_075217.web_.png)
- Potential equaliser for creating electrostatic conduction between surface elements and strut profiles
Protective grille profile
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_34439_20170428_084644.web_.png)
- For constructing frames for woven wire grilles or surface elements
- For woven wire grilles with a wire diameter of up to 3.1 mm
- For surface elements up to 6 mm thick
- Screw fitting of frame to the outside of strut profile (subsequent installation)
- Insertion of frame into the slot of a strut profile or a sliding door profile Al 45
Clamp bushing
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_22537_20160907_142824.web_.png)
- For fastening woven wire grilles in the profile slot
- For woven wire grilles with a wire diameter of up to 3.1 mm
- Suitable for 8 mm and 10 mm slots
- Low-cost connecting element
- Rattle-free mounting
Plate holder
![](https://automation-control.com.au/wp-content/uploads/sites/4/2022/09/MT_39846_20210621_155118.web_.png)
- For virtually gap-free surface element mounting
- Holders for panel elements in front of the profile
- For panel elements with a thickness of 2 … 6 mm
- For subsequent installation in closed frame constructions
- Protection against disassembly possible with headless setscrew (Machinery Directive 2006/42/EC)
![Rexroth Logo](https://automation-control.com.au/wp-content/uploads/sites/4/2020/06/Rexroth-Logo.png)